[vmware server Install]

まず始めにvmwareのホームページでアカウント登録をして
vmware serverのシリアルと取得と、ファイルのダウンロードは行っておく

Kernelソースも必要なのでインストール、あとコンパイラ等も最新へ。
※起動しているカーネルとソースのバージョンはいっしょで無ければいけない
# yum update
# yum install inetd
# yum install kernel
# yum install kernel-devel
# reboot

# tar zxf VMware-server-1.0.8-126538.tar.gz
# cd vmware-server-distrib
# ./vmware-install.pl
A previous installation of VMware software has been detected.
The previous installation was made by the tar installer (version 3).
Keeping the tar3 installer database format.
Uninstalling the tar installation of VMware Server.
xinetd: no process killed
Stopping VMware services:
Virtual machine monitor [ OK ]
The removal of VMware Server 1.0.8 build-126538 for Linux completed
successfully. Thank you for having tried this software.
Installing the content of the package.
In which directory do you want to install the binary files?
[/usr/bin]
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware]
The path "/usr/lib/vmware" does not exist currently. This program is going to
create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the manual files?
[/usr/share/man]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware]
The path "/usr/share/doc/vmware" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
The installation of VMware Server 1.0.8 build-126538 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall.pl".
Before running VMware Server for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config.pl". Do you want this
program to invoke the command for you now? [yes]
Making sure services for VMware Server are stopped.
Stopping VMware services:
Virtual machine monitor [ OK ]
Bridged networking on /dev/vmnet0 [ OK ]
DHCP server on /dev/vmnet1 [ OK ]
Host-only networking on /dev/vmnet1 [ OK ]
DHCP server on /dev/vmnet8 [ OK ]
NAT service on /dev/vmnet8 [ OK ]
Host-only networking on /dev/vmnet8 [ OK ]
Virtual ethernet [ OK ]
You must read and accept the End User License Agreement to continue.
Press enter to display it.
・
・
・
Do you accept? (yes/no) yes
Thank you.
Configuring fallback GTK+ 2.4 libraries.
In which directory do you want to install the mime type icons?
[/usr/share/icons]
What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]
In which directory do you want to install the application's icon?
[/usr/share/pixmaps]
Trying to find a suitable vmmon module for your running kernel.
None of the pre-built vmmon modules for VMware Server is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.18-194.11.1.el5/build/include]
Extracting the sources of the vmmon module.
Building the vmmon module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmmon-only' に入ります
make -C /lib/modules/2.6.18-194.11.1.el5/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/kernels/2.6.18-194.11.1.el5-i686' に入ります
CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config0/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/task.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST
CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: ディレクトリ `/usr/src/kernels/2.6.18-194.11.1.el5-i686' から出ます
cp -f vmmon.ko ./../vmmon.o
make: ディレクトリ `/tmp/vmware-config0/vmmon-only' から出ます
The module loads perfectly in the running kernel.
You have already setup networking.
Would you like to skip networking setup and keep your old settings as they are?
(yes/no) [yes]
------------------------------------------------------------------------
※ここからネットワーク設定
Do you want networking for your virtual machines? (yes/no/help) [yes]
Configuring a bridged network for vmnet0.
The following bridged networks have been defined:
. vmnet0 is bridged to eth0
All your ethernet interfaces are already bridged.
Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]
Configuring a NAT network for vmnet8.
Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]
Probing for an unused private subnet (this can take some time)...
The subnet 192.168.0.0/255.255.255.0 appears to be unused.
The following NAT networks have been defined:
. vmnet8 is a NAT network on private subnet 192.168.0.0.
Do you wish to configure another NAT network? (yes/no) [no]
Do you want to be able to use host-only networking in your virtual machines?
[yes]
Configuring a host-only network for vmnet1.
Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]
Probing for an unused private subnet (this can take some time)...
The subnet 172.16.0.0/255.255.255.0 appears to be unused.
The following host-only networks have been defined:
. vmnet1 is a host-only network on private subnet 172.16.0.0.
Do you wish to configure another host-only network? (yes/no) [no]
Extracting the sources of the vmnet module.
Building the vmnet module.
Using 2.6.x kernel build system.
make: ディレクトリ `/tmp/vmware-config0/vmnet-only' に入ります
make -C /lib/modules/2.6.18-194.11.1.el5/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: ディレクトリ `/usr/src/kernels/2.6.18-194.11.1.el5-i686' に入ります
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST
WARNING: could not find /tmp/vmware-config0/vmnet-only/.smac_linux.x386.o.cmd for /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: ディレクトリ `/usr/src/kernels/2.6.18-194.11.1.el5-i686' から出ます
cp -f vmnet.ko ./../vmnet.o
make: ディレクトリ `/tmp/vmware-config0/vmnet-only' から出ます
The module loads perfectly in the running kernel.
The default port : 902 is not free. We have selected a suitable alternative
port for VMware Server use. You may override this value now.
Remember to use this port when connecting to this server.
Please specify a port for remote console connections to use [904]
※ポートの設定
------------------------------------------------------------------------
WARNING: VMware Server has been configured to run on a port different from the
default port. Remember to use this port when connecting to this server.
xinetd を停止中: [ OK ]
xinetd を起動中: [ OK ]
Configuring the VMware VmPerl Scripting API.
Building the VMware VmPerl Scripting API.
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Installing the VMware VmPerl Scripting API.
The installation of the VMware VmPerl Scripting API succeeded.
Generating SSL Server Certificate
In which directory do you want to keep your virtual machine files?
[/var/lib/vmware/Virtual Machines] /work/vmware/
※仮想HDDで数ギガ以上必要なのでHDDと相談で。
/usr/lib/vmware/bin/vmware-vmx: error while loading shared libraries: libXtst.so.6: cannot open shared object file: No such file or directory
Please enter your 20-character serial number.
Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel: ABCDE-FGHIJ-KLMNO-OPRST
Starting VMware services:
Virtual machine monitor [ OK ]
Virtual ethernet [ OK ]
Bridged networking on /dev/vmnet0 [ OK ]
Host-only networking on /dev/vmnet1 (background) [ OK ]
Host-only networking on /dev/vmnet8 (background) [ OK ]
NAT service on /dev/vmnet8 [ OK ]
The configuration of VMware Server 1.0.8 build-126538 for Linux for this
running kernel completed successfully.
------------------------------------------------------------------------
・vmwareの起動・停止
/etc/init.d/vmware start
/etc/init.d/vmware stop
/etc/init.d/vmware restart
・他のPCからvmwareへ接続するときの接続先例
[IP Address]:[port]
192.168.xxx.xxx:904